GM-D-1760 Gas Melting Furnace

Item: Gas Melting Furnace
Type: Melting and Holding – Dry Hearth
Heating Source: Gas (city gas)
Capacity: 1760 lb (800 kg)
Brand: Dynamo (Canada)
Model: GM-D-1760

Description

Advantages:   The dry hearth charging chamber has no molten metal in it thus it reduces the dangers of metal splash and prevents temperature drop caused by the addition of cold ingots or scrap to the metal bath.  The charging chamber is angled down and as the metal melts it runs into the metal bath.

GM-D-1750 Gas Melting Furnace

ItemImperialMetric
Holding Capacity1760 lbs800 kg
Melting Capacity440 lbs/h200 kg/h
Rated Power (melting burner)793,133 BTU/h200,000 kCal/h
Rated Power (holding burner)594,850 BTU/h150,000 kCal/h
Total Rated Power1,387,983 BTU/h350,000 kCal/h
Gas Pressure Requirement0.7 PSI5 KPa
Gas Consumption (per ton of alum)2500 Cf70 Cm
Furnace Wall Temperature≤ 86F≤ 30C
Maximum Temperature1560F850C
Dipwell Height42”1650 mm
Dipwell Size (W X D)19.7” x 17.7”420 x 350 mm
Furnace Size (L x W x H)115″ x 62″ x 72″2955 x 1580 x 1820 mm

Standard Controls
PLC and HMI color touch screen with graphics and die setup memory
Options
Allen Bradly PLC and HMI control system
Siemans PLC and HMI control system
Omron PLC and HMI control system
Cleanout door on right side

Standard Features GM-D
Cleanout door on left side
Charging door on back
Advanced burner system which reduces generation of oxides
Low metal burn rate of less than 1.5%
Solid frame structure which is easy to clean and maintain
High thermal efficiency
Temperature control accuracy within 10° C
High quality cast refractory lining
Large charging rear door
Large side maintenance door
Temperature alarm
Dual temperature control (melting and holding burners)
Fully automatic operation
Advance PLC control which is easy to learn and operate

Disclaimer: Due to our constant pursuit of technical advancement, all specifications are subject to change without notice.

Reviews

There are no reviews yet.

Be the first to review “GM-D-1760 Gas Melting Furnace”