Machines Detail
Aluminum Gas Dry Hearth Melting Furnace GM-D-2600
- Specifications
- Features
- Options
- Product Overview
| Item | US Standard | Metric |
| Holding Capacity | 2600 lbs | 1200 kg |
| Melting Capacity | 865 lbs/h | 390 kg/h |
| Rated Power (melting burner) | 793,133 BTU/h | 200,000 kCal/h |
| Rated Power (holding burner) | 594,850 BTU/h | 150,000 kCal/h |
| Total Rated Power | 1,387,983 BTU/h | 350,000 kCal/h |
| Gas Pressure Requirement | 0.7 PSI | 5 KPa |
| Gas Consumption (per ton of alum) | 2500 Cf | 70 Cm |
| Furnace Wall Temperature | ≤ 86F | ≤ 30C |
| Maximum Temperature | 1560F | 850C |
| Dipwell Height | 42” | 1650 mm |
| Dipwell Size (W X D) | 23.6” x 21.6” | 600 x 550 mm |
| Furnace Size (L x W x H) | 148″ x 73″ x 114″ | 3750 x 1850 x 2900 mm |
Disclaimer: Due to our constant pursuit of technical advancement, all specifications are subject to change without notice.
- Advance PLC control which is easy to learn and operate
- Advanced burner system which reduces generation of oxides
- Charging door on back
- Cleanout door on left side
- Dual temperature control (melting and holding burners)
- Fully automatic operation
- High quality cast refractory lining
- High thermal efficiency
- Large charging rear door
- Large side maintenance door
- Low metal burn rate of less than 1.5%
- Solid frame structure which is easy to clean and maintain
- Temperature alarm
- Temperature control accuracy within 5° C
STANDARD CONTROLS
- PLC and HMI color touch screen with graphics and die setup memory
OPTIONAL FEATURES
- Allen Bradly PLC and HMI control system
- Siemens PLC and HMI control system
- Omron PLC and HMI control system
- Cleanout door on right side
The dry hearth charging chamber has no molten metal in it thus it reduces the dangers of metal splash and prevents temperature drop caused by the addition of cold ingots or scrap to the metal bath. The charging chamber is angled down and as the metal melts it runs into the metal bath.
DESCRIPTION
- Item Dry Hearth Melting Furnace
- Model GM-D-2600
- Type Melting and Holding
- Heating Source Gas
- Holding Capacity 2600 lbs / 1200 kg
- Melting Capacity 865 lbs / 390 kg (per hour)
- Alloy Aluminum
MAIN FEATURES
gas
aluminum
brass
copper
zinc
remote diag
