Machines Detail

Aluminum Gas Dry Hearth Melting Furnace GM-D-1100

  • Request Quote
  • Schedule a Demo
  • Get Financing
  • Sell Yours Here
  • Other Sizes
  • Email to a Friend
  • Print
Dry Hearth Gas Melting Furnace Aluminum Gas Dry Hearth Melting Furnace GM-D-1100 Aluminum Gas Dry Hearth Melting Furnace GM-D-1100
  •  Specifications
  •  Features
  •  Options
  •  Product Overview
Item US Standard Metric
Holding Capacity 1100 lbs 500 kg
Melting Capacity 365 lbs/h 165 kg/h
Rated Power (melting burner) 594,850 BTU/h 150,000 kCal/h
Rated Power (holding burner) 594,850 BTU/h 150,000 kCal/h
Total Rated Power 1,189,7000 BTU/h 300,000 kCal/h
Gas Pressure Requirement 0.7 PSI 5 KPa
Gas Consumption (per ton of alum) 2500 Cf 70 Cm
Furnace Wall Temperature ≤ 86F ≤ 30C
Maximum Temperature 1560F 850C
Dipwell Height 42” 1650 mm
Dipwell Size (W X D) 16.5” x 13.8” 420 x 350 mm
Furnace Size (L x W x H) 105″ x 56″ x 63″ 2660 x 1420 x 1610 mm

Disclaimer: Due to our constant pursuit of technical advancement, all specifications are subject to change without notice.

  • Advance PLC control which is easy to learn and operate
  • Advanced burner system which reduces generation of oxides
  • Charging door on back
  • Cleanout door on left side
  • Dual temperature control (melting and holding burners)
  • Fully automatic operation
  • High quality cast refractory lining
  • High thermal efficiency
  • Large charging rear door
  • Large side maintenance door
  • Low metal burn rate of less than 1.5%
  • Solid frame structure which is easy to clean and maintain
  • Temperature alarm
  • Temperature control accuracy within 5° C

STANDARD CONTROLS 

  • PLC and HMI color touch screen with graphics and die setup memory

 

OPTIONAL FEATURES

  • Allen Bradly PLC and HMI control system
  • Siemens PLC and HMI control system
  • Omron PLC and HMI control system
  • Cleanout door on right side

The dry hearth charging chamber has no molten metal in it thus it reduces the dangers of metal splash and prevents temperature drop caused by the addition of cold ingots or scrap to the metal bath. The charging chamber is angled down and as the metal melts it runs into the metal bath.

DESCRIPTION
  • Item Dry Hearth Melting Furnace
  • Model GM-D-1100
  • Type Melting and Holding
  • Heating Source Gas
  • Holding Capacity 1100 lbs / 500 kg
  • Melting Capacity 365 lbs / 165 kg (per hour)
  • Alloy Aluminum

MAIN FEATURES
  • gas
  • aluminum
  • brass
  • copper
  • remote diag
  • easy to use
  • extra efficent
Select Your Category
Subscribe Our News letter

    Keep up on our always evolving products features and technology. Enter your e-mail and subscribe to our newsletter.

    Product tags
    Top