Aluminum Chip Washing System
CWS-A SeriesThe CWS-A Series automatic aluminum chip washing system is designed to wash machining fluid and oil from both aluminum chips and shavings. The system can be configured in a variety of different ways to use up as little room as possible. This system washes and brings the moisture content down to approximately 10% using the centrifugal spinner at the end of the line. This system is designed to be used independently or with together with our CDS-A chip drying system which brings the moisture content down to about 2%. The CWS-A is controlled by a PLC and a color HMI touch screen which optimizes performance, operation, and efficiency. This automatic aluminum chip washing system is easy to use and simple to maintain.
Simple and Easy to Use
The vibratory shaker is the first part of the cleaning system. It separates and loosens the chips, and then pushes them onto the the first conveyor.
Cleans Machining Fluid and Oil
The washing drum features a rotating worm gear which agitates and cleans from all angles.
Centrifugal Spinner Reduces Moisture.
The third part of the system is a centrifugal spinner which reduces the chip moisture to about 5%.
VFD DRIVE BLOWER
Better Efficiency and Lower Operating Cost.
Lots of air without control wastes a significant amount of energy. We use VFD Drives combined with Premium Inverter Duty Motors to give you greater RPM only when it is needed. All this translates into greater efficiency, lower operating costs, quieter operation, soft start and longer motor life. The advantage is clear. This is just one of the many ways we use to increase furnace efficiency, and reduce long term operating costs.
We Use Brand Name Components You Know and Already Use.
We use only the finest quality components that are open source and readily available locally in your area, or from our online parts store.
HIGHEST RETURN ON
We Give You More Furnace for Your Money.
To be competitive today’s economy requires that manufacturers run their operations more efficiently and cost effectively than ever before. We offer the highest ROI (return on investment) in the industry. Dynamo gives you high-quality products for a reasonable investment and with more features than any other company. Simply put, we give you the most value for your money!
We Can Remotely Troubleshoot Your Furnace from Our Facility.
Our GDR-B Series dross recycling furnace includes a Remote Connectivity Unit which allows our furnace technicians to remotely check the performance of the furnace, make any needed changes to the program or HMI, or to troubleshoot it directly from our service center. The customer is only required to connect the unit to the Internet via an Ethernet cable. We handle the rest.
Remotely Monitor Your Furnace Performance From Any Device.
As an option, all our furnaces are available with Industry 4.0 remote performance monitoring units which feature a custom dashboard. You can not only monitor furnace performance, but you can be notified before an issue occurs. Included are condition based maintenance reminders and shift performance statistics. Minimize impact of emergencies and maximize furnace uptime, and productivity. See what is going on with the furnace and your production from any device, anywhere in the world.
Covers Most Applications
This system can wash and spin 1,500 lbs of aluminum chips per hour
|US / Imperial (Al)